Useful Features (continued)
g
|
| HIGH SPEED SHUTTER |
|
| SWITCH |
| _SELF | TIMER/TIME LAPSE |
FADE BuI"rON_ | __ | SWITCH |
|
FADE IN
FADE OUT
Use the Fade button to activate the fade feature• The picture will fade out when the Fade button is held down. When the button is released, the picture will fade in, eliminating sudden scene changes. Fade in: Before starting a recording segment, hold
down the Fade button until the picture fades out. Then press the Record/Pause
button to start the recording, as you release the Fade button. The new scene
will fade in.
Fade Out: To fade out at the end of a recording segment, hold down the Fade button. When the picture has faded out, press the Record/Pause button to pause the recording.
-High Speed Shuffer
This switch may be used to record a clear, sharp
image of high speed motion for fine point replay in still or slow mode, when watching the tape on Panasonic TECH 3 or TECH 4 VCR (3 or 4 head VCR). There are 2 Shutter speeds available.
Select The 1/500th Shutter
Slide the switch to the right once to activate the
High Speed Shutter during recording. This mode should be used for subjects moving fast enough to cause blurs.
1/5_
Select The l!1000th Shutter
1/1000l
Slide this switch to the right once more to select the 1/1000 shutter speed.
This mode should be used for extremely fast motions, like a golf swing.
Note:
eThe High Speed Shutter indicator flashes when the light level is inadequate, More light should be provided to achieve better picture quality and color. See page 32 for more information,
23
