Playback
You can play back your Movie recordings immediately on the viewfinder by following the steps given below. You may also play back your Movie recordings directly to a monitor or "IV.
-Operation
1Set the VCR/Camera Selector Switch to the "VCR" position.
2Press the Rewind button to rewind the tape to the desired location.
Preparations:
oYour Movie is connected to a power source
(Battery Pack, AC Adaptor, or Car Battery Cord). oThe Power is ON.
eA cassette is inserted.
3 Press the Play button to view the recorded
picture.
4 Press the Stop button when playback is finished
1 | 2 | 3 | 4 |
-Auto Tracking
With Auto Tracking there is usually no need for manual adjustments to minimize noise in playback for most tapes. Auto Tracking continuously analyzes the signal to adjust for optimum picture quality for each recording.
However, with some recordings you may get a better result using Manual Tracking.
Tracking Control
rees the Set or Select button which is usually ed for the Date/rime setting, Manual Tracking justment is intended for use during playback to nimize noise in the picture,
I-- Auto Playback
IWhen the Movie is in the VCR mode and a tape Iwithout a record safety tab is inserted, the Movie [will b_:Jinto play automatically.
-Special Effects in Playback Mode (Sound is Muted)
To Rapidly Locate A Particular Segment
•Press the Search button.
A rapid forward or reverse picture search will continue,
Press the Search button or Play button to resume normal speed,
To View A Still Picture
•Pressthe Pause/Stillbutton.
A freeze frame picturefrom the currentplayback appears.
•Press the button once more,
This releases the still and playback continues,
Search Speed
Standard Play (SP) Searchis abo_ 3 times normal speed.
17
