
FRONT AND REAR VIEW OF THE HDTV DIGITAL RECEIVER
Rear Panel
SATELLITE IN jack CH3/CH4 Switch RF Out jack | DIGITAL OUTPUTS | NTSC OUTPUTS |
SATELLITE | RF OUT | |
IN | 3 | |
ANT IN | ||
CH 4 | ||
MODEL NO. | ||
SERIAL NO. | ||
AC 120V60Hz | ||
MAX AMPS | ||
MANUFACTURED |
RGB/YPBPR
|
|
|
|
| ® |
|
|
|
| HDTV DIGITAL RECEIVER |
|
| PR | PB | Y | WARNING | ! |
R | B | G | RISK OF ELECTRIC SHOCK | ||
DO NOT OPEN |
|
|
|
| DISTRIBUTED BY | |
|
|
|
| MATSUSHITA ELECTRIC | |
|
|
|
| CORPORATION OF AMERICA | |
H- | DIGITAL | ONE PANASONIC WAY, | |||
SECAUCUS, NEW JERSEY 07094 | |||||
|
|
|
| ||
DIGITAL |
| NTSC OUTPUT | AUDIO OUT TEL LINE | ASSEMBLED IN MEXICO | |
|
ANT IN jack |
| Modem jack |
RGB/YPBPR Switch | H, V jacks | |
|
| jack |
ANT IN | Use to connect an |
| HDTV Digital receiver. |
SATELLITE IN | Use to connect DIRECTV satellite signal to the HDTV Digital |
| Receiver. |
RF OUT | Use to connect the HDTV Digital Receiver to your TV. |
CH3/CH4 Switch | If a coaxial cable is used to connect the digital receiver to |
| your TV, you must set the CH3/CH4 switch to either CH3 or |
| CH4. |
YPBPR / RGB Jacks | Primary jacks used to connect the HDTV Digital Receiver to a |
| DTV Compatible Television. |
RGB/YPBPR Switch | Selects either RGB or Component video (Y,PB,PR) signals |
| according to your TV/Monitor. |
DIGITAL OUTPUTS | Outputs either Component Video or RGB signal . |
NTSC OUTPUTS | Use to connect the HDTV Digital Receiver to a Conventional |
| TV. |
H, V jacks | Horizontal and Vertical sync jacks used with RGB for high- |
| end monitors, video projectors etc.. |
AC 3/PCM OUTPUT | Use to connect your HDTV Digital Receiver to a Dolby Digital |
| |
MODEM | Use to connect a phone line to the HDTV Digital Receiver to |
| enable DIRECTV pay per view services. |
13