GETTING STARTED
Step 3c. Digital TV/Cable Reception with Conventional TV
Follow this diagram if you have a conventional TV, cable service and terrestrial antenna.
Incoming Cable signal
ANT
IN
ANT
OUT
CABLE BOX
NOTE: ANTENNA, A/B SWITCH, RF
CABLES, CABLE BOX, VIDEO AND
CONVENTIONAL TV or MONITOR
A/B
SWITCH
AUDIO
RL VIDEO S
INPUT
ANT IN
HDTV DIGITAL RECEIVER
SATELLITE | RF OUT | |
IN | CH3 | |
ANT IN | ||
CH4 | ||
MODELNO. | ||
SERIALNO. | ||
AC 120V 60Hz | ||
MAXAMPS | ||
MANUFACTURED | ||
RGB/YPBPR
| R |
| |
DIGITAL OUTPUT | NTSC OUTPUT |
| ® |
HDTV DIGITAL RECEIVER |
|
WARNING | ! |
RISK OF ELECTRIC SHOCK | |
DO NOT OPEN |
|
|
|
|
|
|
|
|
|
|
|
|
|
| DISTRIBUTED BY |
|
|
|
|
|
|
| MATSUSHITA ELECTRIC |
|
|
|
|
|
|
| CORPORATION OF AMERICA |
|
|
|
|
|
|
| ONE PANASONIC WAY, |
|
DIGITAL |
| SECAUCUS, NEW JERSEY 07094 |
| ||||
|
|
| |||||
AUDIO OUT TEL LINE | ASSEMBLED IN MEXICO | ||||||
DIGITAL TV/CABLE RECEPTION WITH CONVENTIONAL TV (CABLE
SERVICE AND TERRESTRIAL ANTENNA)
Procedure
•Select 480i by using the Video Out button on the front of the HDTV Digital Receiver.
•Connect the antenna cable to one of the inputs (A or B) of the A/B switch.
•If using a cable box, connect the cable wire from the wall jack to the cable box ANT (antenna) IN jack using a standard RF cable with coaxial connector and connect the cable box ANT (antenna) OUT jack to the other input (A or B) of the A/B switch.
•If not using a cable box, connect the cable wire from the wall jack to the second input of the A/B switch using an RF cable (not shown).
•Connect the OUT signal of the A/B switch to the ANT IN jack of the HDTV Digital Receiver.
•Connect the RF OUT jack to the Conventional TV or Monitor by suing a RF cable.
•Connect the NTSC OUTPUTS of the digital receiver to the A/V inputs of the television or monitor.
34
