ROLLER GUIDE MENU OPERATIONS
Setup : Ant Setup – Auto Scan
The Auto scan allows you to retrieve all of the antenna or unscrambled cable channel. When you press the ACTION key while the START button is highlighted, the automatic scan of all available RF channels will begin. During Auto Scan mode only the following commands will function:
•Power Off (POWER key)
•Stop auto scan (ACTION KEY)
•GUIDE Key
The auto scan normally takes several minutes to complete. To inform the user that the scanning is still in progress: the current channel being scanned, the current percent of scan completed, and a bar meter is displayed, as shown in the figures below. If the channel has been received, the channel number moves to the right and a “Received” message is displayed. If no channels have been received after the scan is completed a message will be displayed indicating that the auto scan has detected no channel and that the user might want to check the input signal connections. Video will not be present in the background during Auto Scan.
GAnt Setup
Ant Input
Auto Scan
Add/Del Ch
Scanning Channel
23
50%
Stop
Press K to perform auto scan.
Ant Setup Setup – Auto Scan
Procedure
HIn the Ant Setup menu, press G button to highlight Auto Scan.
HPress K button and ACTION button to start Auto Scan. After completion of the auto scan, press ACTION and press J button to return to Sat setup.
HPress ACTION button to stop the Auto Scan if necessary.
69
