Panasonic TU-HDS20 manual Setup Access Card, Sat Setup Guide Setup Ant Setup Monitor System Test

ROLLER GUIDE MENU OPERATIONS

Setup : Access Card

The Setup screen allows you to setup a new access card. You can transfer existing access card information to the new access card. This procedure is called “chaining”. When you press the ACTION button while the Access Card is highlighted, a series of Conditional Access driven menus will be displayed. This will direct you on what procedures to perform.

KSat Setup Guide Setup

KAnt Setup

Monitor

System Test

Access Card

New Access Card Configuration :

Please insert the old Access Card and press the ACTION key.

This will start the Card duplication procedure.

Press ACTION to set up a new access card

Access Screen (Entry Point)

Procedure

HIn SETUP menu, press F￿or G￿buttons to highlight Access Card. Follow the directions displayed on-screen.

HPress ACTION button to setup a new access card.

HPress J button to return to Rollerguide menu.

Note: This procedure can only be used in the case where a new card is provided by DIRECTV and is different from the card that comes with the unit.

73