Panasonic TU-HDS20 manual Conventional TV/ Monitor

GETTING STARTED

Step 3a. Digital TV Reception with Conventional TV (no satellite or cable service)

Follow this diagram if you have a conventional TV, no satellite or cable service. Digital and analog channels can be viewed by connecting the HDTV Digital Receiver.

CONVENTIONAL TV/ MONITOR

RAUDIOL VIDEO S -VIDEO

INPUT

ANT IN

NOTE: RF CABLES, S-VIDEO AND

VIDEO CABLES NOT INCLUDED

						HDTV DIGITAL RECEIVER
SATELLITE		RF OUT					®
IN	CH 3					HDTV DIGITAL RECEIVER
ANT IN	CH 4					WARNING	!
			R-AUDIO-L			RISK OF ELECTRIC SHOCK
						DO NOT OPEN
MODEL NO.
SERIAL NO.							DISTRIBUTED BY
							MATSUSHITA ELECTRIC
		RGB/YPBPR					CORPORATION OF AMERICA
MAX AMPS			H-SYNC-L	R-AUDIO-L	VIDEOS-VIDEO	DIGITAL	ONE PANASONIC WAY,
AC 120V 60Hz							SECAUCUS, NEW JERSEY 07094
MANUFACTURED			DIGITAL OUTPUT	NTSC OUTPUT		AUDIO OUT TEL LINE
						(AC-3)	ASSEMBLED IN MEXICO

HDTV DIGITAL RECEIVER, CONVENTIONAL TV/MONITOR

(NO SATELLITE OR CABLE ANTENNA)

Procedure

•Select 480i mode by using the Video Out button on the front of the HDTV Digital Receiver.

•Connect the antenna cable to the ANT IN.

•Connect the RF OUT to the ANT IN of the television or connect Audio and Video cables as shown.

Note: Connect either the S-Video or video input/output as shown above.

•S-Video will provide better picture quality.

•If both S-Video and video are connected, S-Video will override video.

•Connect audio cables from the left and right NTSC audio output jacks on the HDTV Digital Receiver to the left and right audio input jacks on the TV.

32