Panasonic TU-HDS20 manual Setup Satellite Setup Sat. Ports

ROLLER GUIDE MENU OPERATIONS

Setup : Satellite Setup – Sat. Ports

You will be able to select 4 satellite port configurations - No Satellite, Auto Configuration, Satellite A, B or Satellite A, B, C. The DIRECTV Plus Satellite Antenna comes packaged with two LNB’s (Low Noise Block Down-converters) with a multiswitch. The two LNB’s allow for reception of Satellite A, B. These satellites are located at 101 degree WL and 119 degree WL. The DIRECTV Plus Satellite antenna is also capable of accommodating a third LNB for future programming choices. Therefore, if you plan to subscribe to DIRECTV services, including HDTV as well as local to local broadcast channels, you should select Satellite A, B during this setup. The multiswitch provided with the DIRECTV Plus satellite antenna enables you to connect 4 different HDTV Digital Receivers in your home. Please consult your dealer for more details. The HDTV Digital Receiver will allow you to begin auto-detection of the antenna configuration or instead use one of the 4 nominal cases.

GSat Setup Sat Ports Dish Pos Sig Meter

Dish Type K Oval

No Satellite

Auto Configuration

K	Sat A and B
	Sat A, B and C

Press K to setup satellite ports.

Satellite Setup – Sat. Ports Screen

Note: Please also refer to the installation manual for the satellite dish antenna for proper mounting procedure.

Procedure

HPress K and G button to setup satellite ports configuration.

HPress FG buttons to navigate among the choices - No Satellite, Auto Configuration, Sat. A and B and Sat. A, B and C.

HSelect Auto Configuration if you have Round Dish. Select Sat A & B, if you have Oval shaped dish.

HPress ACTION button to save the selection.

HPress J button to return to Sat. Setup menu.

64