GETTING STARTED
Step 3e. Digital 8VSB Cable/Analog Cable with Conventional TV
Follow this diagram if you have a conventional TV, cable service providing 8VSB digital cable cable box and you want to receive digital cable channels through the HDTV Digital Receiver and analog cable channels through the cable box. Please take note that the HDTV Digital Receiver can receive 8 VSB as well as the unscrambled analog cable channels. Therefore, if you have no cable box, the 8 VSB cable can be directly connected to the HDTV Digital Receiver.
Note: The HDTV Digital Receiver is able to receive DTV signals from your local cable provider only if they are transmitted in the 8VSB modulation format approved by the FCC for DTV transmission. Also, your cable provider may elect to transmit in the 8VSB format for only a limited period of time. Please contact your cable provider to determine if 8VSB modulation is available
Analog Signal
SPLITTER
Optional Cable Box
ANT
IN
ANT
OUT
NOTE: ANTENNA, SPLITTER, CABLE BOX, RF
CABLES AND VIDEO CABLES NOT INCLUDED
TV
AUDIO
R L VIDEOS
INPUT
|
|
| ANT IN |
|
|
|
8VSB SIGNAL |
|
| HDTV DIGITAL RECEIVER | |||
SATELLITE | RF OUT |
|
|
|
| ® |
IN | CH3 |
|
|
| HDTV DIGITAL RECEIVER |
|
ANT IN |
|
|
|
| ||
CH4 |
|
|
| WARNING | ! | |
|
|
|
| RISK OF ELECTRIC SHOCK | ||
MODEL NO. |
|
| DO NOT OPEN | |||
|
|
|
|
| ||
SERIAL NO. |
|
|
|
| DISTRIBUTED BY | |
|
|
|
| MATSUSHITA ELECTRIC | ||
AC 120V 60Hz | RGB/YPBPR |
|
|
| CORPORATION OF AMERICA | |
DIGITAL | ONE PANASONIC WAY, | |||||
MAX AMPS |
| SECAUCUS, NEW JERSEY 07094 | ||||
|
|
|
|
|
| |
MANUFACTURED |
| DIGITAL OUTPUT | NTSC OUTPUT | AUDIOOUT TEL LINE | ||
|
|
| ASSEMBLED IN MEXICO | |||
DIGITAL 8 VSB CABLE/ANALOG CABLE WITH CONVENTIONAL TV
Procedure
•Connect the cable from the wall jack to the splitter using a standard RF cable with coaxial connectors.
•Connect one splitter output to the HDTV Digital Receiver ANT IN jack using a RF cable.
•If using a cable box, connect the other splitter output to the cable box ANT (antenna) IN jack using a RF cable. Connect the cable box ANT (antenna) OUT jack to the TV ANT (antenna) IN jack using a RF cable.
•If not using a cable box, connect the 8 VSB cable directly to the HDTV Digital Receiver.
•Follow directions in Getting Started section to connect the HDTV Digital Receiver to a conventional TV.
36
