Panasonic TU-HDS20 manual Setup Satellite Setup Signal Meter

ROLLER GUIDE MENU OPERATIONS

Setup : Satellite Setup – Signal Meter

Since the HDTV Digital Receiver is capable of receiving satellite programming from multiple DIRECTV satellites, the user has the ability to choose one of 3 supported satellites to receive signal strength and is primarily used during the system set-up procedure. The HDTV Digital Receiver signal meter uses a horizontal digital signal strength percent bar meter. The user will have the ability to select which transponder (1 to 32) they wish to measure the signal strength. The following is the signal meter screen

GSat Setup Sat Ports Dish Pos Sig Meter

Satellite	K	A
Transponder		1 of 32
Signal strength 91%

Press K to change satellite.

Signal Meter Screen

.

Procedure

HIn the Sat. Setup menu, press G button to highlight Signal Meter. Sub- menu is displayed.

HPress K to highlight Satellite.

HPress K to change Satellite

HPress FG buttons to select Satellite A, B or C.

HPress ACTION to enter the selection.

HPress G￿button to highlight Transponder.

HPress K button then FG buttons to choose one of 32 transponders. Select the transponder that gives you a signal strength of 85%.

HPress J three times to return to SETUP menu.

66