Basic Transmission Settings
General Description
You can temporarily change the transmission settings either before, or after you place the document on the ADF.
These settings are as follows
•Contrast
•Resolution
•Stamp
•Communication Journal
After your document(s) have been sent, your machine will automatically return to the preset settings.
Contrast
Your machine is preset to Normal contrast. If you wish to send a document with lighter contrast, change the setting to Lighter. If you wish to send a document with darker contrast, change the setting to Darker.
Press CONTRAST to:
CONTRAST = Normal | CONTRAST = Lighter | CONTRAST = Darker |
Resolution
Your machine is preset to Standard resolution, which is suitable for most documents.
If you want to send it with more detail, change the setting to Fine, Super Fine, or Halftone.
Press RESOLUTION to:
RESOLUTION = Standard |
| RESOLUTION = Fine | RESOLUTION = Super Fine | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RESOLUTION = Halftone | RESOLUTION = Halftone (Fine) |
NOTE
1.To change the preset Contrast position, change the setting of Fax Parameter No. 01. (See page 36)
2.To change the preset Resolution position, change the setting of Fax Parameter No. 02. (See page 36)
42