Basic Transmission Settings
Verification Stamp
The Verification Stamp helps you to confirm successful transmissions by stamping the bottom of each successfully transmitted page with a small 
mark.
Press STAMP to:
STAMP = Off | STAMP = On |
Basic Operations
NOTE
1.When you store a document in memory, the Verification Stamp will stamp on the document if it is successfully stored in memory. In this case the Verification Stamp is not a confirmation that the document was successfully transmitted. If you wish to disable the use of the Verification Stamp when storing document in memory, change the setting of Fax Parameter No. 28. (See page 37)
2.To change the preset Verification Stamp position, change the setting of Fax Parameter No. 04. (See page 36)
43