Paradyne and 8985, 8968, 8965, 8955 manual Creating Alarm Threshold Profiles for Model

3. Configuration Using the Web Interface

Creating Alarm Threshold Profiles for Model 8985

Procedure

To create an alarm threshold profile for an SHDSL line card:

1.Click on Create New Profile. The Alarm Threshold Profile Create screen appears.

2.Enter or select the following fields:

Field	Description
Profile Name	Specify a name for this alarm profile.
Loop Attenuation Threshold	Specify a loop attenuation alarm threshold of 0–127 dB.
	An SNMP Loop Attenuation crossing trap message and a
	TL1 autonomous message may be sent if the current loop
	attenuation reaches or exceeds this threshold. A Loop
	Attenuation alarm will also be declared when the current
	Loop Attenuation exceeds this value. A value of 0 disables
	event notifications for the condition.
SNR Margin	Specify an SNR Margin alarm threshold of 0–15 dB. An
	SNMP Margin crossing trap message and a TL1
	autonomous message may be sent if the current SNR
	Margin reaches or drops below this threshold. An SNR
	Margin alarm will also be declared when the current SNR
	Margin has dropped below this value. A value of 0
	disables event notifications for the condition.
Errored Seconds	Specify an ES threshold of 0–900 seconds. An SNMP ES
	trap message and a TL1 autonomous message may be
	sent if the number of ES events in a 15-minute interval
	equals or exceeds the selected value. At most one SNMP
	and one TL1 notification will be sent per interval per
	device. A value of 0 disables event notifications for the
	condition.
Severely-Errored Seconds	Specify an SES threshold of 0–900 seconds. An SNMP
	SES trap message and a TL1 autonomous message may
	be sent if the number of SES events in a 15-minute
	interval equals or exceeds the selected value. At most one
	SNMP and one TL1 notification will be sent per interval
	per device. A value of 0 disables event notifications for the
	condition.
Code Violations	Specify a Code Violations threshold of 0–900 seconds. An
	SNMP code violations trap message and a TL1
	autonomous message may be sent if the number of Code
	Violations in a 15-minute interval equals or exceeds this
	threshold. At most one SNMP and one TL1 notification will
	be sent per interval per device. A value of 0 disables event
	notifications for the condition.

3-10 June 2004 8900-A2-GB20-30