Model 2292 & 2294 Series Getting Started Guide | 3 • Hardware installation |
|
|
Location and mounting requirements
The SmartNode extender is intended to be placed on a desktop or similar sturdy, flat surface that offers easy access to the cables. Allow sufficient space at the rear of the chassis for cable connections. Additionally, you should consider the need to access the unit for future upgrades and maintenance.
Installing the SmartNode extender
SmartNode extender installation consists of the following:
•Placing the device at the desired installation location (see section “Mounting the SmartNode extender” on page 25)
•Installing the interface and power cables (see section “Connecting cables” on page 25)
When you finish installing the SmartNode, go to chapter 4, “Getting started with the SmartNode” on page 32.
Mounting the SmartNode extender
Place the extender on a desktop or similar sturdy, flat surface that offers easy access to the cables. The extender should be installed in a dry environment with sufficient space to allow air circulation for cooling.
Note For proper ventilation, leave at least 2 inches (5 cm) to the left, right, front, and rear of the SmartNode extender.
Connecting cables
Do not work on the system or connect or disconnect cables during periods of lightning activity.
The Interconnecting cables shall be acceptable for external use and shall be rated for the proper application with respect to voltage, current, anticipated temperature, flammability, and mechanical serviceability.
Installing extender cables takes place in the following order:
1.Installing the
2.Installing the 10/100 Ethernet port cable or cables (see “Installing the Ethernet cable” on page 28)
3.Installing the power input (see “Connecting to external power source” on page 30)
Installing the SmartNode extender | 25 |
