About this guide

This guide describes the SmartNode 2294 and 2292 Series hardware, installation and basic configuration. For detailed software configuration information refer to the SmartWare Software Configuration Guide and the avail- able Configuration Notes.

Audience

This guide is intended for the following users:

Operators

Installers

Maintenance technicians

Structure

This guide contains the following chapters and appendices:

Chapter 1 on page 14 provides information about extender features and capabilities

Chapter 2 on page 19 contains an overview describing extender operation and applications

Chapter 3 on page 21 provides quick start hardware installation procedures

Chapter 4 on page 32 describes getting started with the SmartNode extender

Chapter 5 on page 36 contains definitions for the LED status indicators

Chapter 6 on page 38 contains information on contacting Patton technical support for assistance

Appendix B on page 43 contains specifications for the extenders

Appendix C on page 46 provides cable recommendations

Appendix D on page 50 describes the extender’s ports and pin-outs

Appendix E on page 57 lists the factory configuration settings for SmartNode 2294 Series devices

Appendix F on page 59 lists the factory configuration settings for SmartNode 2292 Series devices

Appendix E on page 52 lists the tasks for installing a SmartNode 2292 or 2294 Series extender For best results, read the contents of this guide before you install the extender.

8

Page 8
Image 8
Patton electronic 2294, 2292 manual About this guide, Audience, Structure