SmartNode 4400 Series Getting Started Guide | 3 • Hardware installation |
|
|
Network information
When planning your installation there are certain critical considerations for the network connections. The fol- lowing sections describe such considerations for several types of network interfaces.
Network diagram
Draw a network overview diagram that displays all neighboring IP nodes, connected elements and telephony components.
IP related information
Before you can set up the basic IP connectivity for your SmartNode 4400 series you should have the following information (see table 6):
•IP addresses used for Ethernet LAN and WAN ports
•Subnet mask used for Ethernet LAN and WAN ports
•IP addresses of central H.323 Gatekeeper (if used)
•IP addresses of central PSTN Gateway for H.323 based calls
•IP addresses of central TFTP Server used for configuration upload and download
Table 6. IP addresses/subnets for SN4400
Port/Device | IP Address | IP Subnet |
Ethernet LAN (ETH 0/1)
Ethernet WAN (ETH 0/0)
H.323 Gatekeeper (if used)
IP address of central PSTN gateway
IP address of central TFTP server for configuration upload/downloads
Configuration tools
You will need a PC (or equivalent) with a
AC Power Mains
If you suspect that your AC power is not reliable, for example if room lights flicker often or there is machinery with large motors nearby, have a qualified professional test the power. Install a power conditioner if necessary. Refer to “Connecting power” on page 30.
The mains outlet that is utilized to power the equipment must be within 1 foot (3 meters) of the device and shall be easily accessible.
WARNING
Note When setting up your SmartNode you must consider
Planning the installation | 26 |
