features
mute controller
E—SINGLE SCENE
There are nine MUTE sources available from the MUTE CONTROLLER:the eight
MANUAL MUTE SCENES H, and the MICRO SCENE G. Normally any or all of
these nine sources can be active at-one-time, which allows the operator to combine different mute patterns. The SINGLE SCENE switch, when depressed, permits only one of the nine-sources to be active at-one-time.
F—MICRO UTILITY
This latching switch will put the system into UTILITY mode.The operator can then access and view the various parameters and functions of the con- troller using the UP/DOWN buttons A and the DISPLAY B.
G—MICRO SCENE This switch activates the SEQUENCED SCENE (PATCH). The DISPLAY B shows which of the 128 possible SCENES are active.
H—MANUAL MUTES These eight switches activate the associated MANU- AL MUTE SCENE.Additionally,these switches,along with G,select which MUTE SCENE is being edited when in EDIT/PREVIEW mode.
I—RECALL(NEXT) Each press of this switch increments the SEQUENCED MUTES by one, the DISPLAY B will reflect this.Also used to activate the dis- played scene when an UP/DOWN A button was used to scroll to a new scene. In this case,an * will be displayed as the first-character in the display to indicate that the displayed number is not currently the active scene. Pressing RECALL will put that displayed SCENE into place and clear the * from the display.
