Peavey X-Eight HS, X-Eight RT owner manual Monitor output features, Monitor-out level, Solo-off

Models: X-Eight RT X-Eight HS

1 144
Download 144 pages 9.76 Kb
Page 87
Image 87

master HS module 5

monitor output features

The MONITOR output section controls the audio feed for the console oper- ator. Features are similar to those of ALT OUT section,except that the MON- ITOR section is normally used to access the SOLO system as well as main outputs.

Like the alternate output section, it provides the ability to assign the left and right MASTER signals to a designated pair of balanced male XLR con- nectors on the rear-panel.

By utilizing the mode switches located below the LOCAL MONITOR OUTPUT level control, these signals can be derived in a number of different ways. In default mode (no switches depressed), the post-fader left and right MASTER signals are routed through LOCAL MONITOR level control and appear at the MONITOR OUT balanced male XLR connectors on the rear-panel.

This feed is replaced by the SOLO signal when a SOLO is activated on the console.

monitor-out level

see—alternate out

sum mono

see—alternate out

solo-off

When any of the SOLO switches on the console are active, the SOLO audio is routed in stereo through the MONITOR OUT level control and appears at the left and right MONITOR OUT balanced male XLR connector on the rear-panel.

This setting overrides the left and right feed to the MONITOR output.

When any of the SOLO switches on the console are active, the

MONITOR outputs are not affected.

monitor talkback—TALK TO MONITOR OUT

The TALKBACK system output is added to the left and right MONITOR outputs.The level of the TALKBACK signal is set by the TALKBACK level con- trol in the MASTER section.

p. 87

Page 87
Image 87
Peavey X-Eight HS, X-Eight RT owner manual Monitor output features, Monitor-out level, Solo-off