master RT module 6

alternate output features

The alternate output section allows assignment of the left and right master signals to a separate pair of balanced male XLR jacks on the rear-panel. By utilizing the mode switches located below the ALT OUT level control, these signals can be derived in a number of ways.

In default mode (no switches depressed), the post-fader left and right MAS-

TER signals are routed through the ALT OUT level control and appear at the

ALT OUT connectors.

alternate output level—ALT OUT

This control governs the levels that appear at the ALT OUT left and right balanced XLR connectors on the rear-panel.

sum mono

The MAIN left and right signals are summed-to-mono before the alter- nate output jacks. This summing does not affect the MAIN left and right out- puts.

The MAIN left and right signals are routed in-stereo through the ALT

OUT level control and appear at the left and right ALT OUT balanced male

XLR connectors on the rear-panel.

pre

The signal feeding the ALT OUT section are taken before the main left and right faders.

The signal feeding the ALT OUT section are taken after the MAIN left and right faders.

talkback—TALK TO ALT OUT

The TALKBACK system output is added to the left and right ALT out- puts.The level of the TALKBACK signal is set by the TALKBACK level control in the MASTER section.

p. 107

Page 107
Image 107
Peavey X-Eight HS, X-Eight RT owner manual Alternate output features, Alternate output level-ALT OUT, Pre