master HS module 5

matrix features

The X-Eight HS includes four MATRIX mixes. Each of these outputs can be made up of signals from the eight GROUPS, left, right, mono and an external source.

left, right, and mono levelsMATRIX1–4

These level controls are used to mix the left, right, and mono signals into the corresponding MATRIX.

post-fader—left, right, and mono

These three post-fader switches determine whether the left, right and mono MASTER faders have any effect on signals that available to MATRIX 1–4.

post-left, post-right, post-mono

The left, right and/or mono fader settings have no effect on the LEFT-,

RIGHT- and/or MONO-TO-MATRIX1–4level controls.

The left, right and/or mono faders are introduced into the signal paths. When the left, right and/or mono are muted, the corresponding MATRIX 1–4level controls are also muted.

external input levels—MATRIX1–4

These level controls are used to mix the external MATRIX input signals into the corresponding matrix.The external MATRIX input connectors are located on the rear-panel of the MASTER module.

external matrix routingMTX 1 IN TO ALL

This switch routes the signal from the external MATRIX input 1 jack to the external MATRIX 1–4input level controls.This way,a single external input can be added to each of the four matrices.

When this switch is down, the external MATRIX input jacks 2, 3 and 4 are disabled.

p. 77

Page 77
Image 77
Peavey X-Eight HS, X-Eight RT owner manual Left, right, and mono levels-MATRIX1-4, Post-left, post-right, post-mono