master HS module 5

alternate out features

The ALTERNATE output section allows assignment of the left and right MASTER signals (plus center—if LCR-TO-OUTPUTSis selected) to a separate pair of bal- anced male XLR connectors on the rear-panel.

By utilizing the mode switches located below the ALT OUT level control,these signals can be derived in a number of ways. In default mode (no switches depressed), the post-fader left and right MASTER (in center) signals are rout- ed through the ALT OUT level control and appear at the ALT OUT connectors.

alternate out level

This control sets the levels that appear at the ALT OUT left and right balanced XLR connectors on the rear-panel.

sum mono

The main left and right (and mono/center) signals are summed together as a mono signal.This signal is then routed through the ALT OUT level control and appears at the left and right ALT OUT balanced male XLR connectors on the rear-panel.

The main left and right (and mono/center) signals are routed in stereo through the ALT OUT Level control and appear at the left and right ALT OUT balanced male XLR connectors on the rear-panel.

pre switch

The left and right (and mono/center) master faders have no effect on the left and right (and mono/center) signals routed through the ALT OUT level control and appear at the left and right ALT OUT balanced male XLR connectors on the rear-panel.

The left and right (and mono/center) master faders control the lev- els of the left and right (and mono/center) signals routed through the ALT OUT level control and appear at the left and right ALT OUT balanced male XLR connectors on the rear-panel.

p. 81

Page 81
Image 81
Peavey X-Eight HS, X-Eight RT owner manual Alternate out features, Alternate out level, Sum mono, Pre switch