Peavey X-Eight HS Auxiliary 1-8 output XLR’s, Aux insert point, Aux insert send, Group inputs

group HS module 3

rear panel features

auxiliary 1–8 output XLR’s

This balanced male XLR connector carries the AUX output signal.

These outputs are controlled by their respective AUX output level controls.

see—auxsection, front panel description

aux insert point

Separate 1/4" TRS jacks provide the ability to insert an external signal processor into the signal path of the AUX.

aux insert send

This output connects to the input of an external signal proces- sor. The signal is derived after the AUX-summing amplifier.

This output is ground compensated.

aux insert return

This balanced input accepts a signal from the output of an external signal processor. It accepts either balanced or unbalanced signals.

group inputs 1–8

These 1/4" TRS jacks accept balanced or unbalanced line-level signals. They act as external inputs for GROUPS 1–8.

lamp dim

Goose-neck lamps light-up at full intensity.

Goose-neck lamps light-up at medium intensity.

Plugging a 1/4" plug into this jack does not break the internal signal flow of the AUX BUS.

Plugging a 1/4" plug into this jack breaks the signal flow

of the Group.

+

+

meterbridge connector

This connector carries all of the required connections up to the meter- bridge.

p. 57