Peavey X-Eight HS Left/right assignment-L-R, Group mute, Signal/peak LED-SIG/PEAK, Group fader

group RT module 4

group/aux level features

left-center-right—LCR

The post-fader GROUP signal is assigned to the left, right and mono/center buses.Relative amounts of the signal fed to each bus is deter- mined by the position of the PAN pot.

pan

The PAN pot positions the signal within the stereo left/right field, or between left-and-center or center-and-right in LCR mode.The signal must be assigned as to LCR or the L-R bus in order for the PAN control to have any affect.

see—left-center-right and left/right assignment

mono assignment—M

The Group signal is assigned to the discrete Mono bus. When the

LCR button is depressed, this switch is bypassed.

left/right assignment—L-R

The Group signal is assigned to the main Left and Right output buses.

When the LCR button is depressed, this switch is bypassed.

safe preview LED

see—mono input module

group mute

see—mono input module

write-in label

This label may be written on with a marker, and later wiped clean with a cloth moistened with isopropyl/rubbing alcohol.

signal/peak LED—SIG/PEAK

LED This dual-color LED responds to the pre-fader GROUP signal. It indi- cates green with varying-brightness, in proportion to the audio signal. When the signal approaches clipping, either pre or post fader, the LED turns red.

group fader

The GROUP fader controls the level at which the GROUP signal is sent to any assigned mix-buses or outputs.

p. 67