C624M-C (5/06) 113
Figure 75. Relay and Alarm Settings Page: Alarm Settings Section
LINKING RELAY OUTPUTS TO EXTERNAL EVENTS
This section describes how to link relay outputs to external events, such as motion, alarm, ATM/POS, and video loss events. This section includes
the following topics:
•Linking Relay Outputs to Motion Events on page 113
•Linking Relay Outputs to Alarm Events on page 114
•Linking Relay Outputs to ATM/POS Events on page 114
•Linking Relay Outputs to Video Loss Events on page 115
To access the Event-Relay Link Settings page:
1. On the DX8000 toolbar, click . The Setup dialog box opens to the Camera page.
2. Click . The Linking page opens to the Relay and Alarm Settings page.
3. Click the Event-Relay Link Settings tab.
Linking Relay Outputs to Motion Events
To set relay outputs to activate in response to motion detection events:
1. On the DX8000 toolbar, click . The Setup dialog box opens to the Camera page.
2. Click .
3. Click the Event-Relay Link Settings tab.
4. In the Motion Detection Link Settings section, do the following:
a. Select a camera channel from the Camera Channel drop-down box.
b. Click the button of each relay you want to link to the selected camera.
You can also drag relays onto cameras in the Site tree while in Live mode (main screen).
5. Click Apply.
Figure 76. Event-Relay Link Settings: Motion Detection Link Settings Section
3
b
3c
3a
4
b
4a