C624M-C (5/06) 115

Linking Relay Outputs to Video Loss Events

To set relay outputs to activate in response to a video loss event:
1. On the DX8000 toolbar, click . The Setup dialog box opens to the Camera page.
2. Click .
3. Click the Event-Relay Link Settings tab.
4. In the Video-Loss Link Settings section, do the following:
a. Select a camera from the Video-Loss Channel drop-down box.
b. Click the button for each relay you want to link to the selected Video-Loss Channel.
5. Click Apply.
Figure 79. Event-Relay Link Settings: Video-Loss Link Settings Section
LINKING CAMERAS TO RECORD IN RESPONSE TO EXTERNAL EVENTS
Multiple cameras can be configured to begin recording in response to detected motion, alarm, ATM/POS transaction, and video loss events.
This section describes how to link cameras to record in response to these events and includes the following topic s:
•Linking Cameras to Record in Response to Motion Events on page 116
•Linking Cameras to Record in Response to Alarm Events on page 116
•Linking Cameras to Record in Response to ATM/POS Events on page 117
•Linking Cameras to Record in Response to Video Loss Events on page 117
4
b
4a