C624M-C (5/06) 147
SETTING UP PORT AND DEVICE COMMUNICATION PROPERTIES
The system must be powered on and you must be logged in as a Power User or Administrator to configure communication port settings. Refer to
the instructions that came with your peripheral device for correct settings.
This section describes how to set up port and device communication properties and includes the following topics:
•Understanding the Port/Device Page on page 147
•Setting Up ATM/POS Device Communication Ports on page 149
•Setting Up RS-422/RS-485 Communication Port Properties on page 150
•Installing or Updating Device Protocols on page 163
UNDERSTANDING THE PORT/DEVICE PAGE
This section describes the Port/Device page. The following figure shows the Port/Device page.
Figure 110. Port/Device Page