EXPORTING A SEQUENCE OF STILL IMAGES

Still image formats export the first frame of a bookmarked region and then a single frame for each time interval until the number of images specified has been exported. For example, consider exporting a six-hour bookmarked region of video with an image count of 100 and a time interval of 3 seconds. The resulting export will include the first frame of the bookmarked region followed by 99 additional images taken at

3-second intervals. The first exported image will be the first frame of the bookmarked region and the last image will be the frame taken at 300 seconds into the bookmarked region.

To export a sequence of still images:

1.Select a still image format. Options are BMP, JPEG, and TIF.

2.Select the number of images (1 to 999) you want to save in the sequence.

3.Select the time interval between each saved image in the sequence. Options are as follows:

Continuous

0.5 seconds

1 second

2 second

3 second

4 seconds

5 seconds

￿

￿ ￿

Figure 68. Still Image Export Formats

FINALIZING AN EXPORT PROCESS

This section describes how to finalize an export process. The following guidelines are applicable:

Audio export is available only with DX8000 native, AVI, and ASF video formats.

Real Time setting applies only to DX8000 native, AVI, and ASF video formats.

When the Real Time check box is selected, the DX8000 will export video so it can be played back in real time (30 fps) for the same length of time as the original recording. For example, if video was recorded at 1 fps, this means the DX8000 will insert 29 null frames for every

1 frame of actual video. Thus, one minute of video recorded at 1 fps (60 frames total) will play back for one minute at 30 frames per second (60 frames of actual video interspersed with 1,740 null frames). If the Real Time check box is not selected, one minute of video recorded at 1 fps will play back in two seconds in real time. Figure 69 illustrates the two video streams: 1) one padded with null frames to match the actual time duration and 2) another stream without null frames.

C624M-C (5/06)

99

Page 99
Image 99
Pelco C624M-C (5/06) manual Exporting a Sequence of Still Images, Finalizing AN Export Process

C624M-C (5/06) specifications

The Pelco C624M-C (5/06) is a robust and reliable camera system designed for surveillance and security applications. This model offers a multitude of features that cater to a variety of environments, making it a popular choice among security professionals.

One of the most notable characteristics of the C624M-C is its high-resolution imaging capability. With a resolution that can support detailed video footage, this camera ensures that users can capture clear and precise images, even in challenging conditions. The enhanced clarity is vital for identifying individuals or monitoring activities in critical areas.

The camera is equipped with advanced low-light performance technology. This feature enables the C624M-C to operate effectively in poorly lit conditions, maintaining a high quality of image capture. Its ability to switch to black-and-white mode in low light enhances visibility and ensures that crucial detail is not lost, allowing for 24/7 surveillance.

Moreover, the C624M-C incorporates a robust build quality, designed to withstand the rigors of outdoor environments. Its weather-resistant housing protects internal components from harsh weather conditions, dirt, and moisture, ensuring longevity and dependable performance regardless of external factors.

Another key feature of the Pelco C624M-C is its flexibility in lens selection. The camera supports a range of lenses, allowing users to customize their setup according to specific surveillance needs. This versatility ensures that the camera can adapt to various monitoring scenarios, from wide-angle surveillance to close-up identification.

The camera employs sophisticated motion detection technology, which enhances its surveillance capabilities. This feature allows for real-time alerts based on detected movement, making it easier for security personnel to respond promptly to incidents. Additionally, the system can be integrated with other security protocols and systems, creating a comprehensive surveillance network.

With user-friendly interfaces, the Pelco C624M-C simplifies installation and operation. Users can easily access and manage settings, ensuring that the camera operates optimally in diverse environments. Combined with its advanced features and technologies, the C624M-C meets the security demands of various sectors, including retail, transportation, and critical infrastructure.

In summary, the Pelco C624M-C (5/06) stands out for its high-resolution imaging, low-light performance, durable construction, lens flexibility, and advanced motion detection. These features make it a valuable asset in any security setup, providing peace of mind and effective monitoring for both residential and commercial applications.