Pelco C624M-C (5/06) - page 151

C624M-C (5/06) 151
7. Set up the ATM/POS device data format. For information on setting up the ATM/POS device data format, refer to Setting Up an ATM/POS
Data Format on page 151.
Setting Up an ATM/POS Data Format
The DX8000 allows you to create a data format for each ATM/POS device. You can assign a unique name to each data format. The data format
values determine how data from ATMs or POS terminals is interpreted. This information is used to separate the data stream into individual
transactions and separate the various fields within the transaction. Every field format must match that of the ATM or POS device, especially the
month format.
Access the Network page to configure the data format. For information on accessing the Network page, refer to Setting Up DX8000 Network
Access on page 143. For information about the Port/Device tab, refer to Setting Up Port and Device Communication Properties on page 147.
This section describes how to create a data format template and includes the following topics:
•Understanding the Data Format Page on page 151
•Creating a New Data Format on page 153
•Editing a Data Format on page 153
•Deleting a Data Format on page 153
Understanding the Data Format Page
The DX8000 allows you to create a device data format for each ATM/POS device. You can assign a unique name to each device data format
template.
The following figure shows the Data Format page. Access the Data Format page from the Port/Device page. For information on accessing the
Data Format page, refer to Setting Up DX8000 Network Access on page 143. For information about the Port/Device tab, refer to Setting Up Port
and Device Communication Properties on page 147.
Figure 111. Data Format Page
The following table describes the parts of the Data Format page.




