Operation

FRONT PANEL INDICATORS

NETWORK CONNECTOR

UNIT STATUS

NETWORK STATUS NETWORK ACTIVITY

CONFIGURATION/

RESET BUTTON

Figure 45. CM9700MDD-EVS Front Panel

Pelco badge (power indicator)

The Pelco badge glows blue when the unit has power.

Unit status indicator

Unit status is indicated by one of the following three colors:

Green

The unit is functioning normally.

Amber

The unit is in configuration mode.

Red

The unit is in an error condition.

If the unit status indicator is ever flashing, the unit is in one of three modes (refer to Configuration/Reset Button).

Network status indicator

Network status (connection and speed) is indicated by one of the following conditions:

Off

The unit is not connected to the network.

Solid Amber

The unit is connected to the network using the 100BaseT standard.

Solid Red

The unit is connected to the network using the 10BaseT standard.

NOTE: For optimum performance, Pelco recommends using the 100BaseT standard.

Network activity indicator

The network activity indicator flashes whenever the video CM9700MDD-EVS is sending or receiving network data.

40

C1570M-C (5/06)

Page 40
Image 40
Pelco CM9700MDD-EVS manual Operation, Front Panel Indicators