Pelco CM9700MDD-EVS manual Specifications, Model

Specifications

MODEL
CM9700MDD-EVS	Matrix digital decoder (NET5301R optimized for use with matrix) that converts digital video streams from
	Endura products into analog video to be viewed and controlled on a Pelco CM9700 Series matrix switcher.
SUPPLIED ACCESSORIES
Mating Connectors	One 16-pin
4-pin to 2-pin adapter	For user-supplied power supply
SYSTEM
Processor	PowerPC® 405EP
Operating System	Linux®
Viewing and Control	Via CM9760-KBD (software version 8.24 or higher)
Setup/Configuration
Endura System	Via WS5050 or VCD5000
Matrix System	Via CM9700-MGR (version 9.03.012 or higher)
VIDEO/AUDIO
Video Standards	NTSC/PAL/EIA/CCIR composite
Video Coding	MPEG-4
Video Resolutions
NTSC	4CIF	704 x 480
	2CIF	704 x 240
	CIF	352 x 240
PAL	4CIF	704 x 576
	2CIF	704 x 288
	CIF	352 x 288
Video Output	1, BNC, 75 ohms, 1 Vp-p
Video Display Stream	1
Video Display Mode	Single Image
Audio Input	Reserved for future use
Audio Output	Speaker or line out
Audio Switch	Line, speaker
SERIAL/ALARM/RELAY PORTS
Serial	Pelco P (RS-422); uses 4 of 16 pins on terminal block connector
Alarm Inputs	Reserved for future use
Relay Output	Reserved for future use
FRONT PANEL INDICATORS/FUNCTIONS
Network	RJ-45, 10/100
Power	Blue
Status	Green, amber, red
Network Link/Speed	Amber, red
Network Activity	Green
Configuration/Reset	Recessed button, configuration, reboot, reset, cancel

C1570M-C (5/06) 51