b.Click Format. The Format E: dialog appears (refer to Figure 13).
Figure 13. Format E Dialog Box
c.Verify that NTFS is displayed in the “File system” drop-down box.
d.Click the check box to select “Perform a quick format.”
e.Click OK. The Format E: warning message appears.
f.Read the warning message and then do one of the following:
•Format the partition: Click OK. The partition is formatted (refer to Figure 14).
•Not format the partition: Click Cancel. Format E: warning dialog closes.
Figure 14. Formatted Volume Status
This completes the system drive configuration.
(Optional) If you installed a new data drive in the system disk mounting basket, refer to Optional: Configuring the Data Drive on page 20 to set up the data drive.
19 |
