Pelco ES30PC, ES31PC manual Operation, Power-Updisplay, How To Operate Your System, Operating Notes

Models: ES31PC ES30PC

1 70
Download 70 pages 33.09 Kb
Page 14
Image 14
Operation

Operation

POWER-UP DISPLAY

When the system is powered up, the selected protocol, revision number, and other information is displayed on the monitor. For example, the screen might show the following information:

ESPRIT 16X IOC 2.00 CONFIGURE DONE

D Address 1

P Address 2

Comm 2400, N, 8, 1

The information displayed depends on the selected protocol (C, D, or P) and the menu selection for power-up mode. (Refer to the Power-up Mode in the Programming section).

The information remains on the monitor until the system is moved.

CAMERA xxxx - xxxx

HOW TO OPERATE YOUR SYSTEM

Operation

How to Control

 

 

Pan and Tilt

Move joystick left/right and up/down.

 

 

Scanning

 

Stop scan

Call preset 96.

Random scan

Call preset 97.

Frame scan

Call preset 98.

Auto scan

Call preset 99.

 

 

Zoom Far

To zoom far, do the following:

 

1. Press the Zoom Tele button or turn the joystick clockwise until zoom stops at the optical zoom1 limit.

 

2. Release the button or joystick.

 

3. To continuing zooming (digitally), immediately press the button or turn the joystick clockwise again until you

 

have the picture you want or reach the digital zoom2 limit.

 

 

Zoom Wide

Press the Zoom Wide button or turn the joystick counterclockwise.

 

 

Presets

Refer to the documentation supplied with the controller.

 

 

Patterns

Refer to the documentation supplied with the controller.

 

 

1Optical zoom magnifies the image and the picture remains clear. Resolution is constant.

2Digital zoom magnifies the image and the picture may appear pixilated. The larger the digital zoom limit the greater the reduction in resolution.

OPERATING NOTES

ENVIRONMENTAL RANGE

The operating temperature ranges from a minimum of -50°F (-45°C) to a maximum of 122°F (50°C) for sustained system operation or 140°F (60°C) absolute maximum. The entire unit can de-ice and be operational in two hours from a temperature of -13°F (-25°C). The thermostatically controlled heater consumes 10 watts and cycles on at 61°F (16°C) and off at 81°F (27°C), while the window defroster runs continuously and consumes 2.5 watts.

14

C311M-N (6/06)

Page 14
Image 14
Pelco ES30PC, ES31PC manual Operation, Power-Updisplay, How To Operate Your System, Operating Notes, Environmental Range