Pelco ES30PC, ES31PC manual Azimuth Zero

AZIMUTH ZERO

MAIN MENU	Other Menu		Az/El/Direction
<Camera>	Proportional pan	On
			Set Azimuth Zero
<Line Sync>	Park time minutes	0	Az/El
<Power Up>	Scan Speed deg/s	25	Az/El Line
<Wiper>	Pattern Length	1.5 min	Direction
<Limit Stop>	Spd Profile		Direction Line
<Alert>	<Zone Blank>		Zoom
<Other>	<Az/El/Direction>		Zoom Line
ACK Alert	Exit		Disp Duration
Exit			Exit

Azimuth is the pan angle from 0 to 359 degrees. Azimuth zero is the programmed zero-degree point that is normally set to magnetic north. Once programmed, on-screen pan position (azimuth) and compass readings are based on the set azimuth zero point.

To set azimuth zero:

1.Program preset 95 (28). The main menu appears.

2.Position the cursor (>) beside Other.

3.Press the Iris Open button to enter the Other menu.

4.Position the cursor (>) beside Az/El/Direction.

5.Press the Iris Open button to enter the Az/El/Direction menu.

6.Position the cursor (>) beside Set Azimuth Zero.

7.Press the Iris Open button. The programming menu for Set Azimuth Zero appears on the monitor.

8.Use the joystick to pan the Esprit unit to the desired azimuth zero (0° point) position.

9.Press the Iris Open button to set the azimuth zero position.

32 C311M-N (6/06)