Pelco manual AUTO IR LEVEL MODELS ES30PCBW24/ES31PCBW24

AUTO IR LEVEL (MODELS ES30PCBW24/ES31PCBW24)

MAIN MENU	Camera Menu		Next Menu		IR Filter Menu
	Backlight comp	Off	LowLight limit	Auto	IR filter mode	Auto
<Camera>
<Line Sync>	Zoom limit	x- -	Shutter speed	Auto	Auto IR Level	Dusk
<Power Up>	Reset camera		Auto focus mode	Auto	Exit
<Wiper>	<Gain/AGC>		<IR Filter>
<Limit Stop>	<Auto iris>		<Sharpness>
<Alert>	Next		<White balance>
<Other>	Exit		Prev
ACK Alert			Exit
Exit

The auto IR level is the light level at which the infrared filter switches IN or OUT. Following are the available settings for the Auto IR Level:

•DUSK (default): Approximately 6 lux (black-white), approximately 13 lux (color)

•DARK: Approximately 0.1 lux (black-white), approximately 2 lux (color)

NOTES:

•If backlight compensation is ON and the IR cut filter switches OUT in normal lighting conditions, adjust the Auto IR Level to a darker setting. Refer to the Backlight Compensation section.

•LOW LIGHT does not mean NO LIGHT. Some type of illumination is required (street light, IR light, etc.). The camera is not sensitive to IR light when the IR cut filter is IN.

To change the auto lR level settings:

1.Program preset 95 (28). The main menu appears.

2.Position the cursor (>) beside Camera.

3.Press the Iris Open button to enter the Camera menu.

4.Position the cursor (>) beside Next.

5.Press the Iris Open button to enter the Next menu.

6.Position the cursor (>) beside IR Filter.

7.Press the Iris Open button to enter the IR Filter menu.

8.Position the cursor (>) beside Auto IR Level.

9.Press the Iris Open button. The cursor moves to the right.

10.Move the joystick up or down to toggle between the level settings.

11.SELECT: Press the Iris Open button on your keyboard to select your choice.

CANCEL: Press the Iris Close button if you do not want to change the setting.

28 C311M-N (6/06)