AUTO FOCUS MODE
MAIN MENU |
|
| Camera Menu |
|
|
|
| Next Menu |
| |
|
|
|
| Backlight comp | Off |
|
|
| LowLight limit |
|
<Camera> |
|
|
| |||||||
<Line Sync> |
|
| Zoom limit | x- - |
|
|
| Shutter speed | Auto | |
<Power Up> |
|
| Reset camera |
|
|
|
| Auto focus mode | Auto | |
<Wiper> |
|
| <Gain/AGC> |
|
|
|
| <Sharpness> |
| |
<Limit Stop> |
|
| <Auto iris> |
|
|
|
| <White balance> |
| |
<Alert> |
|
| Next |
|
|
|
| Prev |
| |
<Other> |
|
| Exit |
|
|
|
| Exit |
| |
ACK Alert |
|
|
|
|
|
|
|
|
| |
Exit |
|
|
|
|
|
|
|
|
| |
There are two auto focus modes:
•Auto: If auto focus is in the auto mode, pressing the Focus Far or Focus Near button will place the focus in the manual mode. The system will return to auto focus if you pan or tilt the unit or do a zoom function.
•Off: If the mode is set to off, the dome will operate in the manual mode with one exception. If you issue a command to go to a preset, auto focus will turn on and remain on until you press the Focus Far or Focus Near button.
To change the mode:
1.Program preset 95 (28). The main menu appears.
2.Position the cursor (>) beside Camera.
3.Press the Iris Open button to enter the Camera menu.
4.Position the cursor (>) beside Next.
5.Press the Iris Open button to go to the next camera menu.
6.Position the cursor (>) beside Auto Focus Mode.
7.Press the Iris Open button. The cursor moves to the right, beside the word Auto or Off.
8.Move the joystick up or down to toggle between Auto and Off.
9.SELECT: Press the Iris Open button on your keyboard to select your choice.
CANCEL: Press the Iris Close button if you do not want to change the setting.
26 |
