AZ/EL
MAIN MENU |
|
| Other Menu |
|
|
|
| Az/El/Direction | |
<Camera> |
|
| Proportional pan | On |
|
|
| Set Azimuth Zero | |
<Line Sync> |
|
| Park time minutes | 0 |
|
|
| Az/El | |
<Power Up> |
|
| Scan Speed deg/s | 25 |
|
|
| Az/El Line | |
<Wiper> |
|
| Pattern Length | 1.5 min |
|
|
| Direction | |
<Limit Stop> |
|
| Spd Profile |
|
|
|
| Direction Line | |
<Alert> |
|
| <Zone Blank> |
|
|
|
| Zoom | |
<Other> |
|
|
| <Az/El/Direction> |
|
|
|
| Zoom Line |
ACK Alert |
|
| Exit |
|
|
|
| Disp Duration | |
Exit |
|
|
|
|
|
|
| Exit | |
Az/El programs the horizontal display position of the Azimuth1/Elevation2 label. NOTE: Az/El display is not available while you are programming or running a pattern. The following settings are available for the Az/El label:
•Off: Label is not displayed.
•Left (default): Label is displayed on the
•Center: Label is displayed in the center of the screen.
•Right: Label is displayed on the
To program the horizontal label position for Az/El:
1.Program preset 95 (28). The main menu appears.
2.Position the cursor (>) beside Other.
3.Press the Iris Open button to enter the Other menu.
4.Position the cursor (>) beside Az/El/Direction.
5.Press the Iris Open button to enter the Az/El/Direction menu.
6.Position the cursor (>) beside Az/El.
7.Press the Iris Open button. The cursor moves to the right.
8.Move the joystick up or down to view the available selections.
9.SELECT: Press the Iris Open button to make a selection.
CANCEL: Press the Iris Close button to cancel selection.
1Azimuth is the pan angle from 0° to 359°.
2Elevation is the tilt position from 33° to
30 |
