Pelco ES31PC, ES30PC manual Alert Repeat

ALERT REPEAT

MAIN MENU		Alert Menu
<Camera>
	Repeat	Constant
<Line Sync>	Disp Pos	Top Right
<Power Up>	ACK Act	Always On
<Wiper>	<Currrent Reading>
<Limit Stop>	Alert Reset
<Alert>	Exit
<Other>
ACK Alert
Exit

You can program how often an ALERT label is repeatedly displayed until it is acknowledged by the system controller. The following settings are available:

•Constant: The ALERT label is continually displayed on the monitor until acknowledged.

•15 min off: The ALERT label is displayed every 15 minutes for a 15-second duration until acknowledged.

•30 min off: The ALERT label is displayed every 30 minutes for a 15-second duration until acknowledged.

•60 min off: The ALERT label is displayed every 60 minutes for a 15-second duration until acknowledged.

To program the alert repeat setting:

1.Program preset 95 (28). The main menu appears.

2.Position the cursor (>) beside Alert.

3.Press the Iris Open button to enter the Alert menu.

4.Position the cursor (>) beside Repeat.

5.Press the Iris Open button. The cursor moves to the right.

6.Move the joystick up or down to select the repeat setting.

7.SELECT: Press the Iris Open button on your keyboard to select your choice.

CANCEL: Press the Iris Close button if you do not want to change the setting.

C311M-N (6/06) 25