PARK TIME MINUTES
MAIN MENU |
|
| Other Menu |
| ||
<Camera> |
|
| Proportional pan |
| On | |
<Line Sync> |
|
| Park time minutes | 0 | ||
<Power Up> |
|
| Scan Speed deg/s | 25 | ||
<Wiper> |
|
| Pattern Length |
| 1.5 min | |
<Limit Stop> |
|
| Spd Profile | 90 MPH wind | ||
<Alert> |
|
| Exit |
|
| |
<Other> |
|
|
|
|
|
|
ACK Alert |
|
|
|
|
| |
Exit |
|
|
|
|
| |
This feature causes the system to park at preset 1 after a programmed number of minutes of control inactivity. The time can be set from 1 minute to 720 minutes (12 hours), or it can be set to zero, which disables this feature.
NOTE: Preset 1 must be programmed for the system to park.
To change the park time:
1.Program preset 95 (28). The main menu appears.
2.Position the cursor (>) beside Other.
3.Press the Iris Open button to enter the Other menu.
4.Position the cursor (>) beside Park Time Minutes.
5.Press the Iris Open button. The cursor moves to the right, beside the current park time.
6.Move the joystick up or down to change the park time.
7.SELECT: Press the Iris Open button on your keyboard to select your choice.
CANCEL: Press the Iris Close button if you do not want to change the setting.
44 |
