Pelco ES30PC, ES31PC manual Pressurized Ioc, Removing the IOC

PRESSURIZED IOC

IMPORTANT: Disconnect power to the Esprit system before removing or installing the pressurized cartridge. Software conflicts can occur if the Esprit is not powered-down before removing/installing the IOC.

There are no user-serviceable parts internal to the pressurized integrated optics cartridge. If vessel fails, Pelco recommends that it be returned to the factory for replacement or repair.

Removing the IOC

1. Remove the 4 Phillips screws located on the outside viewing window.

2.Open hinge door to the system. Remove the cap screw that secures the wiper board. Unplug the ribbon cable connector.

RIBBON CABLE CONNECTOR

CAP SCREW

3. Lift up wiper board and unplug the cartridge power cables. Let board dangle to the side of the enclosure.

CARTRIDGE POWER

CABLE CONNECTORS

CARTRIDGE

4. Lift cartridge out of the enclosure.

62 C311M-N (6/06)