Pelco ES31PC, ES30PC manual 120/230 VAC, 24 VAC

120/230 VOLTAGE SELECTOR SWITCH

4. Route the wires and cables through the center of the Esprit mount. Reinstall the transformer module into the base. The transformer module can be positioned in the mount base in only one orientation.

5.ES30PC-5/ES31PC-5 Models Only – Set the 120/230 voltage selector switch on the transformer to the appropriate voltage.

6.Connect wires and cables.

a. Connect to power. Use the two supplied clamp connectors to connect the AC line and neutral.

120/230 VAC

Black wire	Input (AC Line)
White wire	AC Neutral
Green wire	Ground

	24 VAC
White wire		Input (AC Line)
White wire		AC Neutral
Green wire		Ground

b.Connect the video coaxial cable to the BNC connector.

c.Connect the wiring for a two-wire or four-wire control system. This step does not apply to Coaxitron® control systems.

Green wire	RX-
Red wire	RX+
Black wire	TX-
White wire	TX+

d.Connect AUX 2 (optional). Refer to the schematic drawing for an example of how to wire AUX2.

Orange wire	AUX 2
Blue wire	AUX 2 COMMON

C311M-N (6/06) 9