137
•Turn the
•Set the aperture value in increments of 1/2EV or 1/3EV. Set in [Expsr Setting Steps] in the [ACustom] menu. (p.142)
•You can automatically correct the sensitivity if appropriate exposure cannot be set with the set criteria. Set [Sensitivity] to [AUTO] in the Fn menu. (p.115)
•Set the aperture to the s position while holding down the
Exposure Warning
If the subject is too bright or too dark,
the shutter speed will blink in the viewfinder and on the LCD panel. If the
subject is too bright, set the aperture
smaller (larger number), and when too dark, open the aperture further (smaller number). Once blinking stops, you can take the picture.
If both the shutter speed and aperture value are blinking, this indicates being out of metering range and the proper exposure cannot be obtained even if the aperture is adjusted.
Use an ND (Neutral Density) filter if the subject is too bright. Use a flash if it is too dark.
5 FunctionReference
