Printing Using PictBridge | 83 |
This function lets you print images directly from the camera without using a PC (direct printing).
Connect the camera and PictBridge compatible printer with the included USB cable
Select the images you want to print, the number of copies and whether to insert the date or not on the camera after connecting to the printer. Direct printing is performed in the following steps.
Set [Transfer Mode] on camera to [PictBridge] (p.84)
¶
Connect the camera to the printer (p.85)
¶
Set the printing options (p.79)
Print single images (p.86)
Print all images (p.88)
Print with DPOF settings (p.90)
¶
Disconnect the camera from the printer (p.90)
• Use of the AC adapter is recommended when connecting the camera to a printer. The printer may not work properly or the image data may be lost if the battery runs out of power while the camera is connected to the printer.
•Do not disconnect the USB cable during data transfer.
•Depending on the type of printer, not all the settings made on the camera (such as print settings and DPOF settings) may be valid.
•A printing error may occur if the selected number of copies exceeds 500.
•You cannot use the camera to select multiple images for printing on a single sheet. Make the settings on the printer. For details, refer to the operating manual for your printer.
•See the “PENTAX PHOTO Browser 2.1/PENTAX PHOTO Laboratory 2.1 Operating Manual” when connecting to a PC.
3 BasicOperations
