Pentax L specifications 189, Usb

Problem	Cause	Remedy
	The focus mode is	Set the focus mode lever to =. (p.118)
	set to \.
	The focus mode is	Set the focus mode to l (Single
The Autofocus	set to k
		mode). (p.122)
does not work	(Continuous mode).
	The capture mode	Set the capture mode to setting other than
	is set to \(Moving
		\(Moving Object) mode. (p.47)
	Object) mode.
AE lock	AE lock is not
	available when set	Use AE lock with any setting other than a
function does
	to a(manual) mode	(manual) mode or p (bulb) mode.
not operate	or p(bulb) mode
	When flash mode is
	set to [Auto
	discharge] or [Auto	Set flash mode to [Manual discharge] or
	flash+Redeye
Flash does not		[Manl flash+Redeye reduct]. (p.49)
	reduct], the flash will
discharge	not discharge when
	the subject is bright.
	Mode dial is set to	Set mode dial to any setting other than
	[Flash OFF]	[Flash OFF]. (p.47)
The power	The camera does
zoom system
	not have the power	Use manual zoom. (p.48)
does not
	zoom function.
function
USB	The transfer mode	Set transfer mode to [PC].
connection with	is set to [PictBridge].
computer does	An error occurred
not work	while sending USB	Change the transfer mode to [PC-F].
properly*	data.
USB	The transfer mode
connection with
printer does not	is set to [PC] or	Set transfer mode to [PictBridge]. (p.84)
work properly	[PC-F].

In rare cases, the camera may not operate correctly due to static electricity. This can be remedied by taking the batteries out and putting them back in again. When the mirror remains in the up position, take the batteries out and put them back in again. Then, turn the power on. The mirror will retract. After the procedure is done, if the camera operates correctly, it does not require any repairs.

189

6 Appendix

*Refer to p.13 of the “PENTAX PHOTO Browser 2.1/PENTAX PHOTO Laboratory 2.1 Operating Manual” for details on connecting the camera to a PC.