Setting Auto Power Off
You can set the camera to turn off automatically if unused after a certain length of time. Select from [1 min], [3 min], [5 min], [10 min], [30 min] or [Off]. The default setting is [1 min].
Set in [Auto Power Off] in the
| |
Brightness Level | 1 min |
Video Out | 3 min |
Transfer Mode | 5 min |
Auto Power Off | 10 min |
File # | 30 min |
Sensor Cleaning | Off |
Cancel | OK OK |
Auto Power Off will not work during slideshow playback, a USB connection, remote control shooting or while displaying menu or Fn menu.
Resetting the File Number
You can set the File Number used for the images when inserting a new SD Memory Card. The default setting is [SerialNo].
| The file number for the most recently captured image is placed in | |
SerialNo | memory and the file number will remain continuous after inserting | |
| the new SD Memory Card. | |
| Every time a new SD Memory Card is inserted, the file number is | |
Reset | the smallest number. When an SD Memory Card with stored | |
images is inserted, numbering continues from the last stored file | ||
| ||
| number. | |
|
|
Set in [File #] in the [HSet-up] menu. (p.99)
| |
Brightness Level | 0 |
Video Out | NTSC |
Transfer Mode | PC |
Auto Power Off | 1 min |
File # | SerialNo |
Sensor Cleaning | Reset |
Cancel | OK OK |
169
5 FunctionReference
