Pentax L 114, Use the four-way controller To select K Manual, Message screen appears

114

5 FunctionReference

4
	Use the four-way controller (3)
	to select [K (Manual)].		White Balance
			Manual
			Adjust	OK OK
5
	Press the four-way controller
		Manual
(5).		White Balance
	The message screen appears.
		Point camera at subject
			Press the shutter
			release button

6 Fully display a white or gray sheet of paper in the viewfinder under the light to adjust white balance.

7 Press the shutter release button fully.

Slide the focus mode lever to \ when the shutter cannot be released. [OK] appears on the LCD monitor when setting is completed.

[NG] appears when setting is not completed successfully.

8 Press the 4button.

• No image is recorded when the shutter release button is pressed to adjust the white balance.

•Press the {button when adjustment is unsuccessful to set again.

•You can set the range to measure white balance when setting manually. White balance is measured using the entire screen using multi-segment metering (p.130) if [Entire screen] is selected for [Man. WB Measurement] in [ACustom] menu (p.101). White Balance is only adjusted in the spot metering area (p.131) if [Spot Metering Area] is selected.

•If picture is extremely overexposed or underexposed, white balance may not be adjusted. In this case, adjust appropriate exposure and adjust the white balance.