157
Serial Port Profiles
When Connect to remote system is selected, the Rlogin window requires the name of the user who
is connecting to the host.
Configure the following parameters:
SSH Settings
The SSH settings apply when the User Service is set to SSH or the Terminal profile specifies an SSH
connection to a host.
Configure the following parameters:
Term ina l Ty pe Type of terminal attached to this serial port; for example, ANSI or WYSE60.
User This name is passed on to the specified host for the Rlogin session, so that the
user is only prompted for a password.
Note: Some combinations of cipher groups are not available on FIPS firmware versions.
SSH-1 protocol is not available on FIPS firmware versions.
Term ina l Ty pe Type of terminal attached to this serial port; for example, ANSI or WYSE60.
Verbose Mode When enabled, displays debug messages on the terminal.
Default: Disabled
Enable
Compression
When enabled, requests compression of all data. Compression is desirable on
modem lines and other slow connections, but will only slow down things on
fast networks.
Default: Disabled