221
Adding/Editing Users
Session 1, 2, 3, 4 You can configure up to four (4) sessions that the user can select from to
connect to a specific host after that user has successfully logged into the
IOLAN (used only on serial ports configured for the Terminal profile).
Data Options:
zNone—No connection is configured for this session.
zTeln et—For information on the Telnet connection window, see Tel ne t
Settings .
zSSH—For information on the SSH connection window, see SSH Settings .
zRLogin—For information on the RLogin connection window, see Rlogin
Settings .
Default: None
Settings Button Click this button to configure the connection parameters for this session.
Connect
Automatically
Specify whether or not the session(s) will start automatically when the user
logs into the IOLAN.
Default: Disabled
Host The host that the user will connect to in this predefined session.
Default: None
TCP Port The TCP port that the IOLAN will use to connect to the host in this predefined
session.
Default: Telnet-23, SSH-22, Rlogin-513