306
Clustering Slave List
Adding Clustering Slaves
Overview
When you add a clustering slave IOLAN entry, you are adding the IOLAN that users will access
through this master IOLAN.
Field Descriptions
Configure the following parameters:
Server Name Specify a name for the slave IOLAN in the clustering group. This name does
not have to correspond to the proper host name, as it is just used within the
IOLAN.
Field Format: Maximum 15 alphanumeric characters, including spaces
IP Address Specify the IP address of the slave IOLAN in the clustering group.
Field Format: IPv4
Number of Ports Specify the number of ports in the Slave IOLAN that you are adding to the
clustering group.
Data Options: 1, 2, 4, 8, 18, 24, 36, 48
Default: 1
Starting Slave TCP
Port
Specify the first TCP Port number (as specified in the slave IOLAN’s serial
port configuration) on the slave host.
Default: 10001, and increments by one for each serial port
Starting Master
TCP Port
Specify the TCP port number you want to map the first slave IOLAN DS Port
number to. This number should not be a port number that is already in use by
the master IOLAN.
Default: 1024, and then increments by one for each new slave entry
Protocol Specify the protocol that will be used to access the slave IOLAN port.
Data Options: SSH, Telnet
Field Format: Telne t