IOLAN SDS/SCS/STS/MDC User’s Guide, Version 4.5 54
Configuration Methods Chapter 3
3
Introduction
This chapter provides information about the different methods you can use to configure the IOLAN.
Before you can configure the IOLAN, you must assign an IP address to the IOLAN. See the Chapter
4, Getting Started to find out how to assign an IP address to the IOLAN.
Once an IP address is assigned to the IOLAN, you can use any of the configuration methods to:
zConfigure users.
zConfigure IOLAN server parameters.
zConfigure serial port parameters.
zConfigure network parameters.
zConfigure time parameters.
zReboot the IOLAN.
zManage the Perle Remote Power Switch (when applicable).
zManage I/O channels (when applicable).
zView statistics while connected to the IOLAN.