255
HTTP Tunneling
Field Descriptions
Configure the following parameters if host access via a tunnel is needed. Each entry in the list box
defines the application and port numbers an external client will use to access the destination host or
application.
Edit Button Highlight an HTTP Tunnel Destination entry and click the Edit button to
change the entry.
Delete Button Highlight an HTTP Tunnel Destination entry and click the Delete button to
remove the entry from the list.
Tunnel Select the HTTP tunnel to use for this connection
Destination The address of an external host on the peer IOLAN’s LAN. If the destination is
a serial port on the Peer IOLAN or the peer IOLAN itself, select "Same as Tun-
nel".
Add new Services Select either predefined services or custom services.
Predefined Services Select the service or services required. For predefined services, you must specify
an alias local IP address which will be used by the external host to access the ser-
vice.
Custom Services Selecting custom services allows you to enter in a custom application configura-
tion. Select either TCP or UDP.
Local Port The listening TCP/IP or UPD/IP port. This is the port the local host will be using.